Limited Edition Bronze Tile
Size: 4" x 4" X 3/16"
Price: $165 (plus shipping and sales tax)
Edition size: 1000
In the two pictures above, the top picture is of the tile with a Chestnut patina, and waxed and ready for installation. The lower picture is of the tile after the first, black, patina is applied, and the surface of the knot has been sanded and ready for the final, Chestnut, patina, and it's not been waxed at this point. Both patinas are applied while the tile is around 400 degrees and the wax is applied while the tile is cooling down, at about 300 degrees, so it soaks into the pores of the metal before they contract.
If this is the tile you choose to enhance your hearth, kitchen, entrance way, driveway, or living room wall, I'll need to know how you want to set or mount it. The base thickness of this tile is about 3/16" and typically is flat on the back. Stubs, tabs, or threaded rod can be added on the back to bring it out to any thickness desired for $10 each, up to 2" long, but I'll need this information before it's cast.
For further information concerning your particular application please refer to the information on the Bronze Tiles page to see if this answers your questions, and if not, please feel free to email me at firstname.lastname@example.org. Special orders and commissioned work are more than welcome.
Thank you for your interest and appreciation.
Enchanted Creek Studios
Boulder Creek, CA
Copyright 1995 - 2008 by Michael Dunn
All rights reserved
P O Box 455